Home›Services›Maintenance Development Toolbox
Service 06 · Digital Product

Maintenance Development Toolbox

The first platform purpose-built for maintenance program development. Every tool follows the workflow NORSOK Z-008 prescribes — from consequence classification through to CMMS-ready work instructions.

NORSOK Z-008ISO 14224AI-PoweredGMCRCMMPDSaaS
Discuss Your Project Open the Toolbox →

What it is

The Maintenance Development Toolbox is a browser-based platform that guides engineers through the complete maintenance program development workflow. Unlike generic AI tools, every result traces back to a named standard clause — so your documentation stands up to audit.

NORSOK Z-008:2017 §8.5.2 formally defines Generic Maintenance Concepts as a method to "establish a company's minimum requirements to maintenance, reduce the effort in establishing the maintenance programme, and ensure uniform and consistent maintenance activities." The Toolbox operationalises exactly this.

The five-tool workflow

01
Tool 1 — Criticality Classification (Live)
Classify every asset by HSE, production, cost, and containment consequence across C1/C2/C3 levels per NORSOK Z-008 §7. Assigns redundancy class RED-A/B/C. Exports a PDF report.
02
Tool 2 — FMECA (Coming soon)
AI-assisted failure mode identification per maintainable item. Consequence and detectability scoring. Criticality ranking matrix per ISO 14224 and IEC 60812.
03
Tool 3 — RCM / RBM Strategy (Coming soon)
Guided decision logic to select calendar-based, condition-based, or run-to-failure strategies per failure mode. P-F interval analysis and cost-benefit justification per Z-008 §8.2.
04
Tool 4 — GMC Matcher (Live)
Upload any O&M manual — Claude reads it and matches the equipment to the correct Generic Maintenance Concept from the Bluestream library. Returns the full PM plan with maintenance lines and downloadable routine documents.
05
Tool 5 — Work Instruction Generator (Coming soon)
Select a matched concept and PM type — generate a complete, downloadable work instruction document in the BS-GMC format, ready to attach to a work order in your CMMS.

How it's built

Token-based pricing
No seat licences or annual commitments. Pay per analysis — from $2.50. Free trial tokens included on signup.
AI-powered matching
Claude reads your O&M manual natively — including scanned PDFs — and identifies the equipment from the document content, not just keywords.
200+ GMC library
The Bluestream technical library contains over 200 Generic Maintenance Concepts covering rotating equipment, static equipment, electrical, instrumentation, and more.
PDF export
Every criticality classification generates a clean, branded PDF report with the full decision trace and Z-008 clause references — ready to share with clients or auditors.
Downloadable routines
Matched concepts link to downloadable maintenance routine documents in the BS-GMC format — structured work instructions ready for your CMMS.
Secure & authenticated
Clerk authentication, Supabase backend, Stripe payments. Your data is private and your token balance is always visible.

Standards the platform implements

NORSOK Z-008:2017
Risk based maintenance & consequence classification
§7 — Annex C
Consequence classification C1/C2/C3 and RED-A/B/C
§8.5 / §8.5.2
Generic Maintenance Concept definition and application
ISO 14224:2016
Equipment taxonomy and failure mode classification
IEC 60300-3-11
Reliability-Centred Maintenance decision logic
ISO 55000
Asset management principles for MPD framework
Work With Us

Ready to get started?

Tell us about your asset base and what you're trying to solve. The first conversation is free.

Get in Touch All Services
Related Services
Advisory & Strategy
→
Maintenance Planning
→
CMMS Implementation
→